The Freedom of Wireless
Whether you're shooting in the studio or on location, firing your strobes with a sync cord can be impractical, inconvenient, and sometimes even impossible. Not any more!The MicroSync Digital wireless strobe sync system allows you to fire strobes wirelessly. So liberate yourself from the limitations of your sync cord.
Ultra-small, Light and Convenient
The MicroSync Digital is revolutionary because it is super-miniature, extremely lightweight, and almost operates itself. Just place the transmitter in the hot shoe of your camera, plug the receiver into your strobe's power pack and fire! It's that easy.
Automatic Power Management
The MicroSync Digital has a unique automatic on/off power management system. There are no on/off switches on the transmitter or receiver. When you press the shutter, the transmitter turns itself on, send the signal to the receiver, then turns itself off-- all in milliseconds. Because of this advanced power management system, the battery life of the coin cell in the transmitter is anticipated to be 3 years.
4 Channels
There are four channels on the MicroSync Digital to allow you to shoot without interference from other MicroSync users in close proximity.
| TRANSMITTER |
| Test Fire Button |
Press to manually fire strobes |
| LED |
Blinks to confirm start-up, transmission, channel selection, and battery |
| Channel Select Opening |
Insert a paperclip and press to select next channel. LED will confirm your channel selection. |
| Battery |
Replace when LED blinks every five seconds, carefully observing polarity. |
| Hot Foot |
Slips in to the hot shoe of most cameras |
| Transmitter Input |
Used in conjunction with adapter cord to fire strobes from most cameras without a hot shoe. |
| RECEIVER |
| Antenna |
For best range, position vertically and keep clear of metal, concrete, and water. |
| LED |
Blinks to confirm reception, channel selection, and low battery |
| Batteries |
Replace when LED blinks every five seconds, carefully observing polarity. |
| MicroSync Receiver Output |
Replace when LED blinks every five seconds, carefully observing polarity. |
| Strobe Sync Plug |
Connects directly to most strobe power packs. |
| Lanyard Attachment |
Can be used to hang the receiver from tripod or light stand. |
Be the first 
